Cabinet |
Electroplated steel bottom and painted aluminum top |
| Mounting | Table top or 1 ¾ inch rack mount |
| Size | 9 ¼ x 6 ½ x 1 ¾ inches |
| Weight | 2 pounds for tuner; ½ pound for AC Adapter |
| Features | Three independently adjustable outputs, switchable subcarriers, adjustable low-pass filter, main and subcarrier squelch |
| Safety | No lethal or hazardous voltage present within the receiver. There is no shock or fire hazard under any circumstances |
All tests made with 10% injection to baseband (7.5 kHz deviation) at 67 kHz. Measurements are referenced to 6 kHz deviation of subcarrier. Tone control set for treble. Volume control set approximately ¾ full.
| Specification | Test parameter | Min | Typ | Max | Unit |
| Frequency Response | Ref 400 Hz | 0 | db | ||
| 25 Hz | -1 | 0 | db | ||
| 3500 Hz | -2 | 0 | db | ||
| 5000 Hz | -3 | -1 | db | ||
| Deemphasis | Standard | 120 | 150 | 180 | usec |
| Distortion | 1000 Hz |
2.5 |
4.0 |
percent | |
| Crosstalk | 1000 Hz main |
40 |
50 |
db | |
| Sensitivity | 30 db quieting |
10 |
20 | uv | |
| Noise | 1.0 mv rf input |
55 |
50 | db | |
| Audio out (balanced) | Into 8 ohms |
750 |
1000 | mw | |
Into 600 ohms |
13 |
dbm | |||
| Audio out (unbalanced) | Into 600 ohms |
13 |
dbm | ||
| Adjustable filter | Cutoff |
500 |
5000 | Hz | |
Rolloff |
10 |
db/octave |
All ComPol, Inc. receivers utilize our patented superhetrodyne SCA demultiplexer. This technology replaces coil-capacitor filters with ceramic filter elements to guarantee the highest possible fidelity with minimum distortion and out-of-band noise. Also, this results in minimal aging. (Patent number 5,023,933)
Note: The SCA-TM are made in the United States of America. Most major
components are also made in the USA.